Tide times Port Macquarie
When is high tide in Port Macquarie today, and when is the next low tide? The table below gives the high and low waters for today and the next two days in local time, recomputed every time you open the page.
The tide right now
Tide table computed on 2026-10-16 14:07 UTC. Updating live…
High and low tides, next 3 days
| Day | Tide | Time | Height |
|---|---|---|---|
| Saturday 17 October | High tide | 00:56 | +0.06 m |
| Low tide | 06:10 | −0.34 m | |
| High tide | 13:19 | +0.56 m | |
| Low tide | 20:24 | −0.34 m | |
| Sunday 18 October | High tide | 02:05 | +0.03 m |
| Low tide | 07:04 | −0.27 m | |
| High tide | 14:16 | +0.51 m | |
| Low tide | 21:27 | −0.35 m | |
| Monday 19 October | High tide | 03:25 | +0.06 m |
| Low tide | 08:18 | −0.22 m | |
| High tide | 15:18 | +0.48 m | |
| Low tide | 22:24 | −0.39 m |
Times in local time (Australia/Sydney). Heights in metres above (+) or below (−) mean sea level, not chart datum.
Tide map around Port Macquarie
Each dot is a port, coloured by where its water stands between its own low and high; tap the sea anywhere for the level and the curve.
Sea conditions at Port Macquarie
Wave height · Swell · Wind
More for the sea with LayEarth Pro
Pro adds the GPS interference map over the seas where ships report jamming, winds aloft and turbulence, and alerts. 7-day free trial, then 9 USD a month.
The tide at Port Macquarie
Port Macquarie has two high and two low tides a day, of quite different heights. The tidal range is typically about 1.0 m at neap tides and 1.8 m at spring tides, around new and full moon. The prediction is for the sea just off Port Macquarie (-31.5°, 153°).
Questions
- What time is high tide in Port Macquarie today?
- The table above lists today's high and low tides in Port Macquarie in local time (Australia/Sydney), followed by the next two days. It is recomputed from the tide model every time the page is opened.
- Is the tide coming in or going out in Port Macquarie right now?
- The "Sea level now" box says whether the water is rising (coming in) or falling (going out), with the next high and the next low tide beside it.
- Why are the heights different from the harbour tide table?
- Here heights are measured from mean sea level, so low tides are negative. Official tide tables measure from chart datum, close to the lowest possible tide, so their numbers are larger; the times and the range between high and low are what to compare.
- Can I use these tide times for navigation?
- No. They come from a global tide model and can differ from the official local prediction by a few tens of minutes and centimetres, more in estuaries and narrow bays, and they leave out the effect of wind and air pressure. For navigation use the official tide tables of the harbour authority.
Tide times nearby
Coffs Harbour · Newcastle (NSW) · Sydney · Manly · Bondi Beach · Byron Bay
How these tide times are computed
The tide is predicted with the EOT20 global ocean tide model (DGFI-TUM, CC-BY 4.0) from nine harmonic constituents (M2, S2, N2, K2, K1, O1, P1, Q1, M4) at the model point closest to Port Macquarie, on a 0.25° grid, with the astronomical arguments and nodal corrections for each hour. High and low waters are the turning points of the hourly curve, refined between the hours. Storm surge, wind and air pressure are not included. The same model drives the live tide map.